Home - Return to Previous Page
Click on image to zoom

BDS 3 inch Lift Kit FOX 3.0 Factory Race Series Coil-Over for Ford Bronco w/Uniball Control Arm (21-25) (1905FRS)

This image is a representation of the product only. Actual product may vary in appearance.

BDSK-BDS1905FRS
Available
Item sold as a kit. call 800-365-8610 for component availability.
Pricing: $8,734.20
Qty:

Description

Up the ante in your 2021-2025 Ford Bronco 4 Door with style and performance by installing this 3 to 4-inch lift kit featuring FOX Factory Race Series 3.0 coil-over shocks from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes FOX Factory Race Series 3.0 coil-over shocks and heavy duty tubular upper control arms for increased strength. In the rear, BDS utilizes a complementary set of FOX 3.0 Factory Race Series coil-over shocks for an improved ride. 

Net lift height varies based on the factory suspension configuration as follows: 4-Door Sasquatch-equipped net 3" of lift, 4-Door Badlands: net 3.5" of lift, and 4-Door Broncos with the base suspension: net 4" of lift.

FOX Factory Race Series

FOX 3.0 FRS shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 3-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.

HD Upper Control Arms (UCAs)

Built for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed uniball or ball joint with correct positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.

Features & Benefits

  • Performance UCAs increase strength and allow for more suspension travel
  • FOX shocks are fully serviceable and resistant to corrosion and harsh environments.
  • Factory Protection Plus drivetrain warranty included
  • Easy, 100% Bolt on installation
  • 3.0" impact extruded and CNC machined 6061-T6 hard-anodized aluminum body
  • Patented, internal bypass design
  • Application-specific springs
  • 7/8" stainless steel shafts
  • Vehicle-specific tuning maximizes performance
  • Redundant sealing pack system: main seal, wiper seal, scraper seal
  • Finned reservoir, with DSC adjuster
  • Position- and velocity-sensitive damping maximize comfort and control through any terrain
  • Tune vehicle for load, environment, and driving style with DSC adjusters
  • Front coil-overs provide 4-4.5" lift with aftermarket upper control arms on base models and 2-2.5" lift on Sasquatch models

Important Notes

  1. Not compatible with Raptor Models.
  2. Is compatible with HOSS 3.0 Bronco Models
  3. Lift height is based on base suspension package, Badlands and Sasquatch models will net less lift however final ride height is the same for all trims.
  4. Do NOT hit the aluminum knuckle with a hammer to separate the ball joint. Use appropriate ball joint separation tool (OTC 204592).
  5. Does not fit Bronco Sport models.


Will provide the following lift amounts:

2 Door

Detail

With Sasquatch Package - 3" Lift

Specification

  • Front Lift Method : Coil-Over
  • Front Lift Height : 2.5
  • Rear Lift Method : Coil-Over
  • Rear Lift Height : 3"
  • Shocks Included : Yes
  • Lift Height : 2-3.5"

Additional Information

Installation Time: 3-4 hrs

Installation Difficulty: Moderately Easy

Add On Required Hardware: Nothing Requried At This Time

Backspacing: 5.5

Installation Tools: -

Steering Stabilizers Option: -

Add On Accessories: -

Add On Traction Bars: -

Add On Control Arms: -

Vehicle Fitment

Supplied Vehicle Information for BDS1905FRS

Prop 65 Notice

ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov

Details

Categories

Shipping Information

  • Item Requires Shipping