Home - Suspension - Lifts - BDS Lifts
Click on image to zoom

BDS 6.5" High Clearance Lift - 2020 GM HD (753FS)

This image is a representation of the product only. Actual product may vary in appearance.

Pricing: $2,896.06

Prop 65 Notice

ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov

Vehicle Fitment

Supplied Vehicle Information for 753FS

Important Kit Notes

"Requires frame bracket modification.
Torsion Bar Tool required to load/unload torsion bars, The GM specified tool is #CH48809.
Models with two-piece rear driveshafts will require a carrier bearing drop kit.
Factory 17-18"" wheels cannot be reinstalled due to tie rod end interference, stock 20” wheels can be reinstalled with up to a 35x12.50 tire.
In some cases vehicles used in 4WD on the highway regularly could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.
Do not install this suspension system in conjunction with any type of torsion bar lift keys to achieve more that tested 6.5” lift height.
U-bolts will not work vehicles equipped with top-mounted overload springs or add-a-leafs.
Compatible with gas or diesel models.
Compatible with standard models as well as AT4 models.
Some minor trim will be required with certain wheel/tire combination. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks. Trimming will normally included the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter/narrower tires will reduce/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet. "



Shipping Information

  • Item Requires Shipping